Bead Organizer Travel Tower

BEAD ORGANIZER TRAVEL TOWER

The 3D Printed Bead Organizer Travel Tower is perfect to store your Bead Organizer Cups or travel with them. You can even keep your beads in the Cups and they will not spill! Bead everywhere and on the go.

The Travel Tower holds 13 Cups or 1 Container and 7 Cups or 2 Containers and 1 Cup. All perfectly secure.

The Travel Tower has a Slider System which has a dual function: it helps to safely load and unload the Cups and it has a unique Lock System that allows to safely travel with only 3 or 6 Cups (or 1 Container).

Very easy to set up: you can very quickly start and stop with beading.

A fully filled Travel Tower with 13 Bead Organizer Cups weighs 250 grams.

The Travel Tower is shipped in separate parts, but is very easy to assemble. Please see the instructions here: Bead Organizer Travel Tower Tutorial

This video also shows the assembly process: Bead Organizer Travel Tower Promo Video

If you prefer, we can send it assembled and ready to go (please make your choice in the drop-down menu). 

Please make your choice in the drop-down menu what should be printed on the Lid: A-M, N-Z, a-m, n-z, 1-13, 14-26 or blank. 

There are many colors to choose from. Please make your choice in the drop-down menu.

Dimensions Travel Tower:

outside diameter: 8.5 cm/3.4 inch

height: 16 cm/6.3 inch

Bead Organizer Cups

Bead Organizer Cups for the Travel Tower can be added in the drop-down menu, or can be purchased separately here:  Bead Organizer Cups.

These are Cups to organize and sort your beads.

Wonderful and flexible way to bead when you use several or many different colors.

You can choose to have letters(upper case or lower case), numbers or blank Cups.

You can choose to buy either the first half or the second half  of the Alphabet (A-M or N-Z (upper case or lower case)) or numbers(1-13 or 14-26).

Please make your choice in the drop-down menu.

The blank Cups have an empty little circle on which you can write with a marker. The little circles are also suitable to put in a little color sample of your beads.

Each Bead Organizer Cup comes with a piece of fabric (velvet) that can be changed if necessary. We will send the most suitable color  velvet with your order, but if you have a clear preference, please let us know in the comments (you can choose between beige, light blue and rose).

You can unscrew the top of the Cup to easily replace the velvet. Velvet is a very pleasant fabric to bead on.

If you need or want to replace the Velvet, you can purchase it separately here: Velvet Replacement Circles

Dimensions Bead Organizer Cups:

outside diameter: 6 cm/2.4 inch

inside diameter: 5 cm/2 inch

height: 1 cm/0.4 inch

Bead Container

Bead Containers can be added in the drop-down menu, or can be purchased separately here: Bead Container

For Flip Tops, Tubes, needles, thread and more.

Dimensions Bead Container:

outside diameter: 6 cm/2.4 inch

height: 6 cm/2.4 inch

This product is made to order and can take several days to weeks to ship. Please be aware that when you order other items at the same time, everything will be shipped together once it's ready.

As it is made especially for you, it cannot be exchanged or refunded.

For our 3D printed products we use PLA plastic or polylactic acid which is a vegetable-based plastic material, which commonly uses cornstarch as a raw material. This material is a thermoplastic aliphatic polyester and it is the primary natural raw material used in 3D printing. PLA is a fully biodegradable thermoplastic polymer consisting of renewable raw materials, but is still extremely strong.

Disclaimer

All 3D Printed products are made by the Plastic Extrusion method. This means that plastic is heated and layered upon itself to build the final part. As a result the resulting completed parts are not as strong as normal injection molded plastics.

It is not recommended to use 3D Printed parts in confined spaces that are subject to high temperatures as the parts may distort. Examples include: inside a hot car, in direct sunlight or in a dishwasher. We are not responsible for any damage as a result of high heat exposure.

The surface will show extrusion rings, blemishes and other minor imperfections. This does not diminish the use/function of the 3D prints.

- This product is made out of strong PLA plastic, but it’s still breakable

- Don’t leave it out in heat or direct sunlight

- This product is not a toy

- Beware of choking hazard

- Keep it away from children

© All rights are reserved by DiMarca Online.
Please do not copy this invention or instructions, or use them for commercial purposes.